UNIVISIONStructural Steel Solution Pvt. Ltd.
Concept film · not company footage

Bhilai, Chhattisgarh

Structural steel.
From design to erection.

Design, detailing, fabrication and erection of structural steel and industrial ducts. One point of responsibility, from two fabrication units in Bhilai.

Decades of engineering & manufacturing experiencein the leadership team25,140 m²across two Bhilai unitsDesign to erectionfour connected servicesEmerging Company of the YearInternational Achievers Conference, Bangkok 2026

From drawings to delivered steel.

Completed contracts

Completed contracts
NumberClientDelivered scopeQuantity
01STELDetailingDetailed drawings preparation2,000 MTof steel detailed
02Thermal Systems (Hyderabad) Pvt. Ltd.Fabrication & supplyFrom Bhilai3,500 MT
03Indian Oil Corporation LimitedOrder via ZetwerkFabrication & supplyFrom Bhilai640 MT
04Tuna Envirotech Pvt. Ltd.Adani projectFabrication & supplyFrom Bhilai1,000 MT

Drawing to site.

Most steel problems start at the handoffs between designer, detailer, fabricator and erector. Keep all four stages with us, or bring us in for the one you need.

Illustration: frame elevation at design stage, with grid lines, loads and dimensionsABClear spanEave heightRoof loadWindTapered rafterTapered columnIllustration
Frame, loads and dimensions

Stage 01

Design

Structural design for industrial structures and equipment supports, by in-house planning and design engineers.

Illustration
Every member and connection

Stage 02

Detailing

Member geometry and connection details, resolved into fabrication drawings.

Concept film · not company footage
Fabrication in the workshop

Stage 03

Fabrication

Built-up sections on a SAW H-beam line, CNC plasma cutting and two 15 t EOT cranes; members are fabricated, primed and dispatched from Bhilai to project sites across India.

Concept film · not company footage
Erection and installation on site

Stage 04

Erection

Site erection for power, steel and cement plant structures, with interfaces agreed per project.

Need one stage or all four? Send the drawings you have.

Discuss your scope

Two fabrication units in Bhilai.

7,500 m² of covered workshop and 17,640 m² of open yard for fabrication, painting and dispatch.

Unit I

Plot 63/A, Light Industrial Area, Bhilai

13,000 m²

Unit II

Plot C-20, Heavy Industrial Area, Hathkhoj, Bhilai

12,140 m²

Key equipment

  • Two 15 t EOT cranes
  • SAW H-beam line
  • CNC plasma plate cutting
  • Plate bending up to 25 mm × 2.5 m
  • Beam cambering and flange straightening
  • 27 MIG and 14 TIG welding sets
AI-generated concept: a large modern structural steel fabrication facility exterior
Unit I — concept illustration
AI-generated concept: an expansive organised steel fabrication workshop
Unit II — concept illustration

Pre-engineered buildings from one team.

We now take enquiries for pre-engineered buildings: sheds, warehouses and workshops, designed, detailed, fabricated in Bhilai and erected by one team.

1 Watch the erection sequence

Concept film · not company footage
  1. Frames go up on their pedestals
  2. Purlins, girts and the first roof sheets
  3. Cladding closes the building in
Illustration of a clear-span portal-frame steel building: foundations, tapered frames, purlins, girts, bracing and cladding1234567ABAnchor bolts in concrete pedestalHaunched knee connectionTapered columnRod bracing, end bayPurlins carry the roof sheetsProfiled roof sheeting

Typical clear-span portal frame · Illustration, not to scale, not an actual project

2 Inspect the building components

Foundations & anchor bolts. Concrete pedestals with cast-in anchor bolts fix where each frame stands and carry its loads into the ground.

Tapered columns & rafters. Tapered portal frames put steel depth where bending is greatest, so the building spans clear with no internal columns.

Purlins, girts & bracing. Purlins and girts carry the sheeting back to the frames; rod bracing in the end bays keeps the building square against wind.

Roof & wall cladding. Profiled roof and wall sheets close the building in and pass wind and rain loads to the purlins and girts.

Finished building. Trims, gutters, doors, roof lights and a ridge vent complete a weathertight building ready for fit-out.

Drawn as a typical symmetric portal. Each building's frame shape, openings and finishes are designed for its use.

3 Discuss a requirement

Planning a shed, warehouse or workshop? Send the plan size, height and location, and we will discuss a PEB scope with you.

Discuss a PEB requirement

More concept views

Concept film · not company footage
Concept view: exterior
Concept film · not company footage
Concept view: clear-span interior
Concept film · not company footage

Industrial ducts,
formed in Bhilai.

Round and rectangular ducts, transitions and elbows, rolled and fabricated from plate up to 25 mm thick and 2.5 m wide, alongside the structural steel that carries them.

  • Round & rectangular
  • Plate thickness up to 25 mm
  • Transitions & elbows

Discuss an industrial duct requirement

A young company. Seasoned leadership.

Univision was founded in 2023 by engineers with decades of experience running heavy fabrication for steel, power and process plants.

Chairman & Managing Director

T.P.K. Swamy

B.E. Mechanical · Decades of engineering and manufacturing experience

Has run heavy engineering fabrication units with full P&L responsibility for:

  • Steel plants
  • Thermal power
  • Petrochemicals and refineries
  • Hydropower
  • Rail bridges
  • High-rise steel buildings

Director

Mohammed M

M.Tech, Transportation Engineering (Bridge Design), 1995

A structural engineering background in bridge design.

Director

Thota Roja Kumari

Accounting and Finance department

Certificates and registration

Select a document to view the supplied copy.

Company-provided document copies. Contact us for current certification status and project-specific documentation.

Quality, backed by documentation.

Our in-house QA/QC engineers inspect work in the workshop and on site. Agree the drawings, inspection points and documentation your project needs before fabrication begins.

Discuss quality requirements

International recognition

Recognition

Bangkok · Thailand2026

Award recipient

Emerging Company of the Year Award for Business Excellence

Univision Structural Steel Solution Pvt. Ltd. received the Emerging Company of the Year Award for Business Excellence at the 20th International Business Conclave & Awards Ceremony in Bangkok, Thailand.

Organizer
International Achievers Conference (IAC)
Event
20th International Business Conclave & Awards Ceremony
Event date
28 February 2026 · Bangkok, Thailand

Coming next · planned An expansion-bellows unit is planned for applications across refinery, cement, steel and chemical industries. Talk to us now about upcoming bellows requirements.

Send your drawings and project requirements.

  • Drawings you have
  • Services you need
  • Project location
  • Expected schedule
Email your project details

Opens your email app. Attach drawings there before sending.

Prefer another email service? Write to marketing@univisionsteel.com.

Privacy information
WorksUnit I · Plot 63/A, Light Industrial Area, Bhilai, Durg 490026Unit II · Plot C-20, Heavy Industrial Area, Hathkhoj, Bhilai 490026
Call +91 79741 70219Email us